Tach Question
Cobranut
Join Date: Jul 2003 Posts: 6 VA |
2002-10-07 43522
Has anyone added a tach to a small diesel?
I recently bought a BX2200, and would like to add a small digital tachometer.
Does anyone know of a unit that would work?
I assume it would trigger off the alternator, and could be adjusted to compensate for the pulley ratio and number of poles.
Thanks,
David
Reply to | Quote Reply | Add Photo
Tach Question
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2002-10-08 43548
It's called Tiny Tach. Cost about 70 bucks and near as I can tell it reads the injector pulse from a fuel line. ....
Link:
Click Here
 
Reply to | Quote Reply | Add Photo
Tach Question
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2002-10-08 43554
That's a good find Mark, I didn't know of one till reading this, fortunatly no one has asked me! ....
Reply to | Quote Reply | Add Photo
Tach Question
hickmo
Join Date: Jul 2003 Posts: 8 fayetteville Ga |
2002-10-08 43564
I have a tiny Tach on my Bx 2200. It was real simple to install. The hook up uses a 6mm transducer. Clean all of the paint from the small area where it goes. The red wire goes to the battery and the black goes to ground. The long wire that is with transducer wire, goes to a ground that is under the hood. I mounted mine on the dash above the turn switches. The wires go down the same hole that the the turn signal goes.It works very well.Now I don't have to run at full throttle to get 3125 rpms for 540 rear mowing. ....
Reply to | Quote Reply | Add Photo
Tach Question
Cobranut
Join Date: Jul 2003 Posts: 6 VA |
2002-10-08 43573
Thanks guys,
That's exactly what I'm looking for.
I have a Tiny-Tachs on my ATV and old lawn tractor, but it didn't occur to me that they made a diesel model.
Thanks again,
David ....
Reply to | Quote Reply | Add Photo
Tach Question
jeff r
Join Date: Jul 2003 Posts: 428 burton. michigan Pics |
2002-10-08 43579
WAY TO GO MARK H., I will buy you a cyber beer, that is just what I been looking for. Anybody know what size injector lines are on my B2150 HST??? Hurry, I want to order one of these because I think my factory tach is sticking even when I put in a new tach cable. I think the problem is in the tach itself and I shudder to think what a new tach costs. ....
Reply to | Quote Reply | Add Photo
Tach Question
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2002-10-08 43583
Jeff, hopefully you have a caliper: 6mm = .244 inches, 7mm =.284 inches, 5mm = .202 inches.
On your backhoe 3.785 liters = one gallon. Last I heard, bars were either gold or chocolate, so you are on your own there.
....
Reply to | Quote Reply | Add Photo
Tach Question
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2002-10-09 43585
Yep, good info! I was going blab about rigging up hall-effect sensors or something. Just as well I got sidetracked.
It’s likely a good assumption that all injector lines on Kubotas are metric but the fit of a transducer would be critical. It would be easy enough to confuse ¼” line at .25” with 6mm at .244” even with a caliper measurement. Dang, I’ve been looking for my own vernier that for about a month now off and on. I’ve had it for about 30 years and hope it’s still around.
....
Reply to | Quote Reply | Add Photo
Go Top
Share This